Equipment & Components for the Satcom & Microwave/RF Industries

Loop Test Translators
Portable - Battery Powered

  • Ka Bands and Ku Bands
  • Synthesised LO - Ethernet Control
  • Simulates Satellite Link
  • All Frequency Combinations
  • Tx-Rx, Tx-L and L-Rx Conversions
  • Local and Remote Ethernet Control for LO Frequency and Signal Attenuation
  • Internal 10MHz Reference
  • Standard and Custom Options

The LBP series of Ka Band and Ku Band Portable, Battery Powered Loop Test Translators (LTT) feature Synthesised Variable Frequency Local Oscillators (LOs) to provide the user with the most versatile and comprehensive operating configurations for translation of uplink (Tx) frequencies to either downlink (Rx) frequencies or to L-Band, and for L- Band to downlink (Rx)

These Translators simulate the satellite transponder frequency conversion for system alignment and continuous quality monitoring.

Both the LO frequency and through path attenuation can be controlled either locally with direct readout on the front panel LCD or remotely via Ethernet with a virtual control panel.

The LTT contains a 12V, 14AH rechargeable battery and is supplied with an external battery charger which connects to the unit via a 3 pin XLR connector and is powered from a 100-240V, 50-60Hz A/C supply.

-00 Standard
-01 Specific Programmed Frequency Steps
-04 60dB Attenuation Range
-05 1.0dB Attenuation Steps
-06 Input/Output filters for 60dB Isolation
-07 LO Filter for 60dB LO Rejection
-08 Input/Output Isolators for 1.3:1 VSWR and
      -20dB Conversion Gain
-09 Internal Amplifier for 0dB nom. Conversion Gain
-12 Waveguide RF Input
-15 Special Custom Options

 General Specifications
 LO Frequency Steps 25MHz
 Maximum Input Level +10dBm
 Conversion Gain -35dB nom. (see options)
 Conversion Gain Flatness +/-2dB typ.
  +/-0.5dB/40MHz max.
 Attenuation Range 30dB min.  (see options)
 Attenuation Control 0.25dB Steps
 Impedance 50 ohms
 Input VSWR 1.8:1 typ. (see options)
 Output VSWR 1.8:1 typ. (see options)
 Signal Related Spurious -25dBc typ.
 LO Related Spurious & Harmonics -30dBm typ.
 Non Signal or LO Related Spurious -60dBc min.
 Power - Internal Battery 12V, 14AH
 Recharging Power Connector 3 Pin XLR
 Battery Charger External
 Operating Temperature 0+50C (see options)
 Storage Temperature -10 to +70C
 Lock Alarm LED, Front Panel & Ethernet
 Input Connector (see options) 2.92mm female Ka Band
  SMA female Ku Band
 Output Connector SMA female
 Reference Input Connector BNC female
 Ethernet Connector RJ45
 Size 260 x 150 x 420mm incl. connectors
LO Phase Noise (dBc/Hz) typical
Offset Frequency (Hz) LO Frequency (GHz)
2.0 10.0 12.0 27.0
100 -80 -70 -65 -60
1K -90 -85 -75 -70
10K -95 -90 -80 -75
100K -95 -90 -80 -80
1M -120 -115 -115 -110

Model No Translation Bands Input
Frequency in Range
Frequency in Range
Ka Tx-Rx
LBP-25002700-Ka Ka Tx-L 27.5-31.5 0.8-2.6 25.0-27.0
LBP-16901860-Ka Ka L-Rx 0.8-2.6 17.7-21.2 16.9-18.6
LBP-01490330-Ku Ku Tx-Rx 12.75-14.5 10.7-12.75 1.49-3.30
LBP-11801305-Ku Ku Tx-L 12.75-14.5 0.95-2.7 11.8-13.05
LBP-09751005-Ku Ku L-Rx 0.95-2.7 10.7-12.75 9.75-10.05

We reserve the right to change standard product specifications without notice but will be pleased to consider control drawings for quotation.

T: +44 (0)1376 550220 F: +44 (0)1376 552145 E: 40A Springwood Drive, Braintree, Essex CM7 2YN, England